Product
Information
Snappi® offers a
practical and reliable solution to fitting a cloth nappy, without using nappy
pins! Snappi® is made from a stretchable non-toxic material, which is T-shaped
with grips on each end. These grips hook into the cloth nappy to ensure a snug
but comfortable fit for baby. Snappi® makes using environmentally friendly cloth
nappies easy and ouch less! (for you and baby).
•
Recommend the use of two or three
Snappi® Nappy Fasteners in rotation
•
Snappi®
can be used with flat or pre-fold cloth nappies, and works best on towelling
nappies.
•
One
size fits all
Added Safety
Feature
The Snappi fastener underwent a makeover in 2006. The basic shape & function
remains the same, the only change being that the rings at the end of each leg
have been replaced with a solid piece embossed with the Snappi logo & a
crescent-shaped loop at the end of each leg, which gives the Snappi this extra
safety feature.
When the Snappi
fastener is not in use, fold the loop over the back of the Snappi end to fit
over the teeth of the white grip - see photo below. This acts as a barrier &
prevents the sharp teeth from being exposed. These loops are NOT to be pulled on
when attaching the Snappi fastener to the nappies. When attaching the Snappi,
hold onto the solid part of the tab.
NOTE: Keep all Snappi
fasteners out of childrens reach when not in use.
Back to Top
Directions
Snappi fasteners must be used responsibly, & need to be used correctly in order
to work effectively.
1. STRETCH the Snappi fastener before its first use. The stretching
triggers the 'memory' of the Snappi to return to its original size & in so
doing, pulls the nappy together to the middle to allow for a snug fit.
This is essential for the Snappi to work properly. This can be done by
holding the Snappi in the centre with one hand & close to the end of the leg
with the other hand. Then s-t-r-e-t-c-h a few times (10 or so). As you do
this you should feel how the material 'softens' or gets more elastic. Follow
this stretching procedure with each leg. The Snappi is now ready to go!
2. Make sure that the Snappi is ATTACHED SECURELY. It is important that
the Snappi 'leg' being attached be stretched across the nappy before hooking it
into the nappy. When attaching the Snappi, hold onto the solid part of the tab.
DO NOT pull on the loops.
Hook Left
Stretch ACROSS & Hook Right
Stretch DOWN & Hook Center
The Snappi fastener should go from a T shape to a Y shape.
By following these instructions, the Snappi should be secure & the nappy will
fit snugly. always place a cover over the nappy & Snappi fastener.
Back to Top
How It Works
